Operation steps before the large-scale cone calorimeter mahre is prepared for the experiment

The large cone calorimeter mahre is a very precise experimental instrument. A lot of preparatory work is needed during operation. If the preparatory work is not in place or the steps are omitted, the experimental instrument may be damaged. Sex, so you must be cautious when operating

cone calorimeter mahre

The large cone calorimeter mahre needs to prepare a sample according to the standard before starting up, and install the sample. Then you need to check whether the gas is sufficient, and if it is insufficient, you need to add gas in time. When in use, you need to turn on the device to warm up for two hours, and check that the device is working properly. In addition, fire extinguishers and other fire extinguishing devices are required to be normal in order to prepare for fire extinguishing after the experiment is completed. Finally, according to the needs of the experiment, open the corresponding gas ball valve.


Disclaimer: This article is reproduced from other media. The purpose of reprinting is to convey more information. It does not mean that this website agrees with its views and is responsible for its authenticity, and does not bear any legal responsibility. All resources on this site are collected on the Internet. The purpose of sharing is for everyone's learning and reference only. If there is copyright or intellectual property infringement, please leave us a message.
©Copyright 2009-2020 Yahoo Perspective   cryydr@163.com   Contact Us   SiteMap